I'm install FC20 into WB-Quad by following URL.
https://fedoraproject.org/wiki/Architectures/ARM/F20/Installation#For_the_Wandboard_.28Freescale_i.MX6.29
But it's cannot see any SATA devices on board. I've found solution on following URL.
http://www.swissdutch.ch/sata.php
It's require imx6q-wandboard.dtb but URL on site are loss. But I've found new on URL.
http://less.cogeco.net/fedora/linux/development/rawhide/armhfp/os/images/pxeboot/dtb/
And I choose imx6q-wandboard-revb1.dtb (My board is rev B1). Put it into __boot/dtb/ on sd-card. Then I'm modify __boot/extlinux/extlinux.conf by changed
"ftd /dtb/imx6q-wandboard.dtb"
to
"fdt /dtb/imx6q-wandboard-revb1.dtb".
Then create /etc/modules-load.d/imx.conf. This is inside it.
# Load ahci imx at boot
ahci_platform
ahci_imx
When I'm create directory /hdd finished i'm put this line to __/etc/fstab
/dev/sda1 /hdd ext4 defaults 0 0
And Then reboot.
Sources.
https://fedoraproject.org/wiki/Architectures/ARM/F20/Installation#For_the_Wandboard_.28Freescale_i.MX6.29
http://www.swissdutch.ch/sata.php
http://less.cogeco.net/fedora/linux/development/rawhide/armhfp/os/images/pxeboot/dtb/
ไม่มีความคิดเห็น:
แสดงความคิดเห็น